Comments

• 

  Dennis Pennington October 14, 2009 at 12:08am

  Henry, MLCS Barry Paul was the senior instructor at ML "A" school when I attended in 1985.
• 

  Henry R. Lee October 12, 2009 at 9:49pm

  Hey guys I have a question did any of you serve with Barry N. Paul ??
  I beleive he was an instuctor at DATC for a spell , I m just curious how
  those of you who may of know him liked working with or under him , he made cheif sometime in the early 70's
• 

  Henry R. Lee October 7, 2009 at 12:41pm

  Hey Art K.T. Ross was in my class in July 68 class -B- Molders School
  when you were an instructor for class -A- molders school, last I saw him he was on the Delta in long Beach in 71 on my way out of the Navy
  
  Henry Lee
• 

  arthur d devonshire October 6, 2009 at 11:34pm

  Dembow was great molder, after he retired from the navy he got the job as shop sup at the sima foundry here in san diego. We lost Bo about three years ago. Dose anybody know a molder KT Ross the last I heard he was in AZ. How a molder named MLC Friskhorn. Dev, san diego
• 

  arthur d devonshire October 6, 2009 at 11:22pm

  I know a lot of the molders talked about in the comments. When I learn how to download a my comments I will be have some good info on the molders I served with. This navy molders is a great web site. Dev, san diego
• 

  Henry R. Lee October 6, 2009 at 9:55pm

  I am having a hard time trying to remember evryone in my class ,but I know that I have met Denbow while I was there . my class had a project before gradution it was a large gate valve which was to weigh about 200plus lbs so the man in charge of that weighing the pattern and sutracting the weight of the core etc we got the mold ready charged the furnance run the heat down tapped the furnance and poured it sure would have been a beautiful casting except we come up short of brz.abt. 50 or so lbs. damn what a kicker .
  after I was discharged for the last time ,I went to work in a cast iron foundry in Amarillo, Tx.it had so many trip hazards I quit after two days ,only time I worked with metal after that , was for Vistawall arch products highrise curtain wall,one job took me just over two years to cut that was the PPG World HQ. in Pittsburg,PA. there were more but thats one I'll never forget, I cut 9 out of every ten mullions .other than
  that my life has been very dull ,here in Shawnee,OK. there isn't much to do but set around like an old man and chase ghosts
• 

  Henry R. Lee October 6, 2009 at 1:23pm

  Ok guys as for knowing a Doug Paxton , he must have went aboard the Bryce Canyon right after I left in late Feb. , as for Charlie Whiteside , I apparrently have the wrong one , Denbow has been nagging me all nighthe must have been one of the other cheifs stationed at DATC
  Question - did any of you ever know Cheif ML Daniel-Danny-Miller .
  what do any of you know about a Cheif Pike from what I've been told
  he was sort of a legend
• 

  Craig Lami October 6, 2009 at 9:10am

  When he got out, he was head3ed for Washington or Oregon with his new wife.
• 

  Craig Lami October 5, 2009 at 11:17pm

  I knew Denbow in 74 when I went to B-school in San Diego. He stayed there until he retired in about 78. He went to work for the civilians doing the same thing in the same place with different clothes and a bigger pay check.
  I ran into Guitarez a couple times after A-school, but he didn't have anything to say.
  Henry, you were on the Bryce Canyon in 70 & 71. Did you know a guy named Doug Paxton? He would have been just out of A-school and probably called himself Quigley.
• 

  Henry R. Lee October 5, 2009 at 7:17pm

  Thanks Aldo it has been over thirty years I thought my memory had left me for sure